The approximate costs and value of a typical Dining Room Remodeling project are summarized below. Use higher estimates for larger metropolitan areas and the lower estimates where home prices are below the national average. Adjust costs for substitutions or refinements in the last section. For size differences of up to 25%, scale total costs in direct proportion to the size of your project. Use the adjusted costs as a basis for setting a material budget and for comparing contractor bids (if you choose to have a professional perform the work).

You can begin planning for your kitchen remodel by knowing a rough estimate of where your money will be spent. For a full kitchen renovation, 1/3 of your budget will go to cabinetry, 1/3 will be spent on installation, and the remaining 1/3 is allocated to finishing touches. Finishing touches could be appliances, lighting, faucets, sinks, plumbing, backsplash, countertops, or flooring. Keeping these in mind, you’ll be able to balance your budget and more easily plan your project. For additional details on the cost of remodeling a kitchen, please visit our cost guide.
Installing all of the necessary plumbing and electrical work while walls and floors are unfinished will result in savings.Starting from scratch doesn't require demolition, which can save you around $2,000. Framing may be necessary to define rooms and spaces. System upgrades usually call for minor expansions to the HVAC and electrical systems, but not adding plumbing. The bulk of the cost, however, is in flooring and finishing. After wrapping things up with carpeting, drywall, and ceiling material, you can expect to pay anywhere from $6,500 to $15,500.

Now you have the opportunity to change the entire feel of your home with new lighting, furniture, and paint! With so much new space, you may decide you want professional help to give your new floor plan the attention it deserves. The cost of hiring an interior designer depends greatly on a number of factors, including where you live, but a good baseline is between $50 and $200 per hour. An interior decorator will help turn your ideas about the new space into an exciting and stylish reality. Just remember that you still have to pay the cost of furniture, paint, and accents on top of the designer’s hourly rate.

The kitchen work triangle is the area where most tasks are performed in your kitchen. This usually involves the refrigerator, the stove, and the sink. The spacing of these items is essential, as you’ll spend a lot of time moving back and forth between these three focal points. Our kitchen designers will help you find the optimal location for your work triangle. We will design your kitchen to be functional to fit your specific needs.


On the average, renovations for ceiling treatments in living rooms run from $500 to $2300 per project, varying on the types of material used, the complexity of the project, the type of labor and installation. Projects which are more complex are obviously more expensive. Some of these require multiple stage installations such as constructing a built up or drop ceiling and applying features. The height of the ceiling is also a critical aspect of the cost since high ceilings require added scaffolding and are more difficult to deal with. The shape of the ceiling is also another cost factor as slanted and curved ceilings are much harder to install than flat ceilings. The more complex the design of the ceiling is the more extensive the prep work is, the more site visits required and the more added staging and equipment needed for construction.
If time is critical, consider a basement finishing kit. A finishing kit has insulated wall panels, and some include a walkable flooring surface and ceiling material for DIY installation. Depending on the size of your basement, these kits can be installed in a weekend. However, the floor won't be carpeted, the walls won't be painted, and there will be no electrical or plumbing. Other features such as doors, trim work, and more also need to be added.
Converting your dining room into a home office or sitting room isn’t just about computer networks and proper electricity. You also want it to aesthetically look like a home office, which means new paint and new lighting. The ambient light fixtures in your dining room, which probably include an overhead light or chandelier and a lamp or two, won’t be bright enough for working and studying. Depending on the type of fixtures you choose, new lighting will cost you within the range of $150 to $990. Finally, give the room a new coat of paint and some new window dressings before moving in your office furniture to give the room a professional feel.
Adding built in shelves and custom cabinets and media centers will require the services of a finish carpenter or a cabinet maker. On the average, the cost of installing built in furniture for living room renovation projects run from $290 to $1300 per unit, with prices varying based on the type of material and finishing, its size, style and the complexity of the design.
When the homeowners removed the structure's dropped ceilings and drywall, they discovered dramatic roof beams and charming beadboard. In the dining room, and throughout the residence, they sanded the pine floors and stained them a rich ebony. Here, they sit in midcentury Woodard chairs. A friend crafted the dining table out of wood salvaged from a bowling lane. The oversize light formerly illuminated a factory. The walls are painted High-Gloss White by Behr.
×